Lists of Components

#710 Universal Cleaning System

Components:
Referenced throughout the manual

(1) "T" handle - used for pulling a tight patch.

(2) 6" chamber and pistol cleaning rod

(3) 14" pistol cleaning rod

(4) 8-32 connector - connects any two rods together to clean long barrel rifles and shotguns.

(5) #4 Shotgun Cleaning Tip (forged from solid brass). patented internal thread.

(6) #3 Tip for rifles and pistols 30 to 45 caliber

(7) #2 Tip for rifles and pistols 22 to 270

(8) #3 obstruction remover - used to facilitate cleaning.

(9) #2 obstruction remover - removes cases stuck in the chamber, and mud or snow from the, bore

(10) #5 Shotgun brush adapter

(11) Large patch saver 12-10 gauge

(12) Small patch saver 20-16 gauge

(13) Otis Bore Solvent CLP

(14) All-Caliber Patches (cleans 22 to 12 gauge.)

(15) 32" Nylon Coated Flexible Steel Cleaning Rod

#410 Shotgun Cleaning System

Components:

(1) "T" handle - used for tight pulls with the flexible cleaning rod (11).
(2) Chamber cleaning rod - used to clean the chamber and choke tube threads.
(3) Connector - The 38" and the 6" rod can be connected for cleaning barrels up to 45" in length.
(4) Solid Brass Shotgun Tip - has a patented internal thread.
(5) Brass Bore Brush - The phosphorus bronze bristles scrub but will not damage the firearm. Gives 20 times the life of an ordinary brush!
(6) Obstruction remover - used to remove mud, snow, stuck hulls, and some wads in the barrel.
(7) Solid Brass Adapter - fits the flexible cleaning rod and the 5/16 - 27 thread on the shotgun brush.
(8) Large Patch Saver - For 12 and 10 gauge shotguns.
(9) Small Patch Saver - For 16 and 20 gauge shotguns.
(10) Otis Bore Solvent CLP (combination solvent, lubricant, and rust inhibitor) - contains PTFE that coats the bore to eliminate lead and plastic build-up.
(11) Nylon Coated Flexible Steel Cleaning Rod - quickly cleans any shotgun without disassembly.

#610 Pistol Cleaning System

Components:
(1) "T" handle - used for pulling a tight patch.
(2) 14" Nylon Coated Flexible Steel Cleaning Rod for pistols with barrels from 4 to 12".
(3) #45 Bore Brush with brass stem and core. The phosphorus bronze bristles scrub, but will not damage the firearm. Gives 20 times the life of an ordinary brush! Cleans 44 to 45 caliber.
(4) #35 Bore Brush-cleans 35, 9mm and 38 caliber pistols, and is oversized to clean the chamber and shoulder
(5) #2 Solid Forged Brass Tip - cleans from 22 to 270 caliber.
(6) #3 Solid Forged Brass Tip - cleans 30 to 45 caliber.
(7) #3 Large Obstruction remover - allows you to remove bore obstructions and stuck cases.
(8) #2 Small Obstruction remover - used to facilitate cleaning by protecting the threads.
(9) 6" pistol cleaning rod - cleans short barrel pistols 2 to 6 inch.
(10) 20" cleaning rod - this nylon coated flexible steel rod is for pistols that use rifle calibers or barrels up to 20" long.
(11) Otis Bore Solvent CLP (combination solvent, lubricant, and rust inhibitor) - contains PTFE that coats the bore to eliminate lead and copper build-up.
(12) All-Caliber Patches -c lean from 22 to 45 caliber.